DC 5V/12V/24V Trigger Infinite Cycle Delay Timer Relay Switch Turn On Off Loop Module 0.2s-30s/0.2s-300s/0.2s-30Min/0.2s-300Min(Size:5V)

RelaysDC 5V/12V/24V Trigger Infinite Cycle Delay Timer Relay Switch Turn On Off Loop Module 0.2s-30s/0.2s-300s/0.2s-30Min/0.2s-300MinFeature:1. Using high-quality materials, the quality is guaranteed2. There are four delay time ranges, and the delay time can be selected by the switch3. Long service life, can withstand 100,000 times of use4. Its power consumption is very small, less than 1W5. High sensitivity, fast and accurate detection6. Wide range of applicationsSpecifications:Voltage: 5V 12V 24V optional<;1.0WOutput: passive output (ie dry contact), a group of relay normally open + normally closed output. The maximum should not exceed 10ATime range: (4 gears, selected by switch)First gear: range 0.2 seconds-30 seconds, accuracy: 0.1 secondsSecond gear: range 0.2 seconds-300 seconds (5 minutes), accuracy: 0.3 secondsThird gear: range 0.2 seconds-30 minutes, accuracy: 1.8 secondsFourth gear: range 0.2 seconds-300 minutes (5 hours), accuracy: 18 secondsLifespan: 100,000 actionsInput: voltage signal, valid signal above 1.5V, current needs at least 0.1mAModule voltage:5V DC: The power requirements of the module, the range is 4.5V-6V, it must be DC12V DC: The power requirements of the module, the range is 10V-16V, it must be DC24V DC: The power requirement of the module, the range is 20V-30V, it must be DCTerminal:Positive pole of DC power supply of V+ moduleThe negative pole of the DC power supply of the GND module is also the reference GND of the signal voltage.IN signal voltage input, low level below 1V, high level above 1.5V, and indeterminate in the middle. Withstands up to 30VNO relay normally open contactFrequently contacted contacts of NC relaysCOM relay contact common terminalInstructions:Time range setting:When the selector switch is placed in the 30 position, it means 0-30 is adjustableWhen the selector switch is

• Relays